A Steel Door Frame Roll Forming Machine is for produce door frames as desired sizes. with multifunctional punch holes and notches for folding into frame.
The Steel Door Frame are light weight, sturdy, and manufactured from Galvanized steel with the thickness from 0.9-2.0mm.
The Steel door frames can be used extensively and are often preferred to timber due to their cost efficiency as they have installation advantages over timber door frames. Metal door frames can be easily fitted during construction or retrofitted. Their overall resilience and surface finish make them a popular and often more viable option to timber.
There are 2 main kinds of steel door frames:
Single Rebate Door Frame, The Doors only can be assembled in one side of the frame
Double Rebate Door Frame, The Doors can be assembled both side of the door frame
Butted knocked down joint
Welded Joint
Mitered Joint
Spot Welded joint
Mitered welded
Latest design, self joint. which is widely used in steel door industry. Believe Industry Company a whole automatic roll forming machine to produce such door frame
Structure And Function: steel plate and beam welded structure, used for
supporting and uncoiling the steel strips.
Type: double head decoiler
Decoiler Mandrel Expansion And Tension: manual adjust
Expansion Range: 450-540mm
Decoiling: electric decoiling
Motor Power: 3 kw
Maximum Capacity: 2000kg on each side
Coil I.D: 508mm; Max Coil O.D: 1350mm
Pneumatic adjust the gap between rollers
Type: 2-roll pinch feeding, 9-roll leveling
Diameter Of Leveling Roll: 80mm
Material Of Leveling Roll: 40Cr, high frequency quenching
Motor Power For Leveling: 3kw gear motor
Main electric parts are all of famous brand
Adopt Gear as transmission
Limit Switch to ensure the speed of the leveling will be synchronous with the uncoiler
The punch device is used to punch notches for easy mitered folding( self joint), and punch holes for support, hinges and also locks.
Servo motor power: 1.9kw
Punching Device Structure: 4-guide pillar type
Punching Mould: 1 set; Material: SDK11, HRC58-62
Hydraulic Power: 11kw; Hydraulic Pressure: 20Mpa
Electromagnetic valve: Beijing HUADE
Machine Structure: Adopt H beam steel welded frame as the machine
base, guide pole type roller stands screwed on the machine base
Rollers Station: 22 forming steps
Material Thickness:8-2.0
Shaft Material: 40Cr HB220-260; Diameter: 75mm
Roller Material: 45# steel, fine machining; roller surface chrome plated thickness more than 0.05mm
Main Motor Power:11kw
Forming Speed: 15- 20 m/min
Drive: Chain and gear
Speed Control: by Frequency Inverter