C CHANNEL ROLL FORMING MACHINE

C channel steel stud roll forming machine is widely used in the celling and drywall construction. Compared with cement construction and wooden construction, Steel frame is more light and durable.


Golden Integrity c channel roll forming machine

C channels are suitable for use in structural applications or engineering, furthermore,offering properties such as increased strength and durability and are typically used tosupport floor joists.in fact, We supply C channel steel roll forming machine sections forindustrial and construction applications. Steel C Track Roll Forming Machine availableinclude bespoke and standard channels. 



C channel rolling forming machine



Automatic C channel steel roll forming machine

Automatic C channel steel roll forming machine is weldly used in the celling and drywall construction. Compared with cement construction and wooden construction,

Steel frame is more light and durable.Thanks to these advantages, C/U/Omega stud is welcomed in construction field.

Advantages of our Automatic C channel steel roll forming machine
  1. High speed.Our high speed C/U/Omega stud roll forming machine speed can up t0 80m/min.

Normally, C/U/Omega stud roll forming machine's speed is around 45m/min,

  1. High durable. high speed C/U/Omega stud roll forming machine adopts cast steel roller fixer.

  2. High automatic. high speed C/U/Omega stud roll forming machine adopts PLC systerm.

User can set production quantity, production speed on control cabinet.

Working process:

Decoiler--feeding--roll forming--punching(if need holes or logo)--cutting--product table

Technical parameters for the whole production line:

1.Manual decoiler

Capacity:1.5T

Coil inner diameter:350-450mm

Coil width:300mm

2.Roll forming machine

1)machine structure:cast iron roller fixer

2)Main power:5KW siemens motor

3)Forming stations:12 stands

4) Way of drive:by gear

5)Diameter of shaft:50mm

6)Max rolling speed: 45m/min

7)Thickness: 0.3-0.8mm galvanized steel or prepainted sheet,G550Mpa

8) Material  width:100mm~300mm

9)Material of roller:CR12 with quenched treatment

10)Material of blade mould:Cr12, quenched 58-62

11)way of cutting:hydraulic mould cutting(flying cut,cut without stop)

12)Length cutting tolerance:+/-1.0mm

13) Electrical requirement:380V,50Hz,3P

3.Control system

1)Control system:PLC

2)PLC brand:Delta

3)Screen:Touch screen

4)Screen brand:Touch screen

4.Hydraulic system:

1)Hydraulic pressure :16Mpa

2)Hydraulic power:4kw

3)Cooling system:fan cooling

5.Product table

1)Length:3m

2)Manual or automatic


C CHANNEL ROLL FORMING MACHINE插图

C CHANNEL ROLL FORMING MACHINE插图1

C CHANNEL ROLL FORMING MACHINE插图2

C CHANNEL ROLL FORMING MACHINE插图3

C CHANNEL ROLL FORMING MACHINE插图4